When I lent my services to a collegue who was working on a film about 12 years ago, I was introduced to the world of cnc. I remember watching this huge machining centre milling out a slab of mdf and turning it into a fantastic set of gears. I knew that it would have taken me hours to achieve the same thing with traditional power tools. I decided then that I would invest in a cnc router for my own business Oxenham Design. At that time I could turn on a computer, but even to check email seemed like a crazy set of operations. I persevered and learned every piece of relevant software I could get my hands on. I am now fortunate enough to be using Vectric's ASPIRE software, and Techno cnc routers, which has helped us to create some amazing projects, both in part, or in full. I thought that this blog would be a great place to share "behind the scenes" adventures with the software, materials and equipment we use, as well as the projects we build.

Tuesday 27 November 2012

Monopoly Game over 2

The green monopoly house was next up. We modified it slightly from the files to make it a bit faster to build. The house is actually going to be a lampshade in one shot.
I drew all the vectors up in Aspire, and laid them out for cutting on our Techno cnc.
I cut these all on our big machine, as the LC 3024 was a little too small to get them all in one file.
I cut the parts with a 1/8" end mill at about 120 inches per min. 6 minutes until I had a stack of acrylic, ready to work on!
One of the tools here at Oxenham Design that we don't use all the time, but when we need it, becomes the 3rd most valuable tool I own. It's basically a mitering jig. It has a Makita laminate trimmer mounted underneath, and the table pivots from 0 to 85 degrees. On top of that, the assembly moves in and out via a rotating knob, to allow for perfect miters on small pieces. We use this whenever we're building miniatures, and I'd be lost without it.
 With all of the pieces run through the mitering jig, it was down to assembly!
They all went together perfectly! And with routered miter joins, all the corners were flawless.

I love the way it came out. Once it was cleaned off from all the electro-static dust that seemed to appear out of nowhere that is. The whole thing mounts to the light base through a whole in the chimney, and the chimney hides the nut.

Once the rest of the pieces were finished, there was nothing to do but clean-up!
The art director agreed to take a trip to the shop, and pickup the pieces, saving us a very early delivery to location in the morning! Thanks MB!







This was a great build! The timeline was perfect, 10 hours a day, nothing crazy like the summer.

I hope I get the dog back, that would be awesome!
8)
JO


1 comment:

  1. This comment has been removed by a blog administrator.

    ReplyDelete